CLQZJ - 8245A-VPI 100 EPOXY ADHESIVE PART "A"
- MSDS: CLQZJ
- Manufacturer: MACKLANBURG DUNCAN
- Product Name: 8245A-VPI 100 EPOXY ADHESIVE PART "A"
- National Stock Number: 8040-01-043-3196
Product Identification
Product ID:8245A-VPI 100 EPOXY ADHESIVE PART "A"
MSDS Date:09/28/1998
FSC:8040
NIIN:01-043-3196
Status Code:A
MSDS Number: CLQZJ
Responsible Party
OKLAHOMA CITY, OK 73118-0188
US
Emergency Phone: 1-800-424-9300
Info Phone: 800-654-8454 / 405-528-4411
Preparer: ERNEST CARTER
Cage: 82464
Contractor
Telephone: 800-654-8454 / 405-528-4411
Cage: 82464
Ingredients
EPICHLOROHYDRIN BISPHENOL A RESIN
CAS: 25036-25-3
ISOPROPYL ALCOHOL
CAS: 67-63-0
RTECS: NT8050000
OSHA PEL 980 MG/M3;400 PPM
ACGIH TLV: 983 MG/M3;400 PPM
ETHYLENE GLYCOL MONOPROPYL ETHER
CAS: 2807-30-9
RTECS: KM2800000
Hazards
Health Hazards Acute and Chronic:CHRONIC: PROLONGED OR REPEATED SKIN
CONTACT MAY BE IRRITATION. ACUTE: INHALATION OF HIGH VAPOR
CONCENTRATIONS MAY HAVE RESULTS RANGING FROM DIZZINESS AND HEADACHE
TO UNCONSCIOUSNESS, AS WELL AS IRRITA TION OF THE REPIRATORY TRACT.
ROUTES OF ENTRY ARE INHALATION AND SKIN. VAPORS MAY IRRITATE EYES,
NOSE & THROAT.
Effects of Overexposure:VAPORS MAY IRRITATE EYES, NOSE & THROAT.
First Aid
First Aid:SKIN: WASH WITH SOAP AND WATER. EYES: FLUSH WITH LARGE
AMOUNTS OF WATER FOR 15 MINUTES. TAKE TO PHYSICIAN FOR DEFINITIVE
MEDICAL TREATMENT. INGESTION: TREAT SYMPTOMATICALLY AND CONTACT A
PHYSICIAN. IN HALATION: IF OVERCOME BY VAPORS, REMOVE FROM
EXPOSURE, RESTORE BREATHING, KEEP INDIVIDUAL CALM. CALL A
PHYSICIAN.
Fire Fighting
Flash Point Method:SCC
Flash Point:=27.8C, 82.F
Lower Limits:2
Upper Limits:12
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, OR FOAM.
Fire Fighting Procedures:WATER SPRAY MAY BE INEFFECTIVE. WATER MAY BE
USED TO COOL CLOSED CONTAINERS TO PREVENT PRESSURE BUILDUP AND
POSSIBLE AUTO-IGNITION OR EXPLOSION WHEN EXPOSED TO EXTREME HEAT.
FOG NOZZLES ARE PREFERRED IF WATER IS USED.
Unusual Fire/Explosion Hazard:KEEP CONTAINERS CLOSED EXCEPT WHEN IN
USE. CLOSED CONTAINERS MAY EXPLODE WHEN EXPOSED TO EXTREME HEAT. DO
NOT USE IN VICINITY OF OPEN FLAME OR SPARKS. EXTINGUISH ALL PILOT
LIGHTS AND ALL SOURCES OF I GNITION.
Accidental Release
Spill Release Procedures:SCRAPE INTO CONTAINERS FOR DISPOSAL.
Handling
Handling and Storage Precautions:DO NOT STORE ABOVE 120 F . VAPORS MAY
IGNITE EXPLOSIVELY. PREVENT BUILDUP OF VAPORS. KEEP AWAY FROM HEAT,
SPARKS, AND OPEN FLAME. AVOID PROLONGED BREATHING OF VAPORS AND
REPEATED CONTACT WITH SKIN.
Other Precautions:KEEP OUT OF THE REACH OF CHILDREN!
Exposure Controls
Respiratory Protection:NONE REQUIRED WITH ADEQUATE VENTILATION.
Ventilation:USE GENERAL/LOCAL EXHAUST TO PREVENT BUILDUP OF VAPORS.
Protective Gloves:NONE REQUIRED
Eye Protection:NORMAL PRECAUTIONS.
Work Hygienic Practices:GOOD GENERAL CLEANLINESS AND HYGIENE.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:=82.2C, 180.F
Vapor Pres:33 AT 68 DEGREES
Vapor Density:>1
Evaporation Rate & Reference:>1
Solubility in Water:NONE
Appearance and Odor:WHITE MEDIUM PASTE, MILD CHARACTERISTIC ODOR
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIALS.
Stability Condition to Avoid:HEAT AND OPEN FLAME.
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY PRODUCE
CARBON MONOXIDE AND CARBON DIOXIDE, AS WELL AS ORGANIC COMPOUNDS OF
UNKNOWN STRUCTURE.
Conditions to Avoid Polymerization:WILL NOT OCCUR.
Disposal
Waste Disposal Methods:DISPOSE OF ACCORDING TO FEDERAL, STATE AND LOCAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.